Published by FunfairledJan 14,2019
Ordinary incandescent lighting effects are about 10 lumens per watt, and the life expectancy is about 1000 hours. Its working principle is: when the light is connected into the circuit, the current flows through the filament, and the thermal effect of the current causes the incandescent lamp to emit continuous visible light and Infrared, this phenomenon can be noticed when the filament temperature rises to 700K. Because the filament temperature during operation is very high, most of the energy is wasted in the form of infrared radiation. Because the filament temperature is high, the evaporation is also fast, so the life is also Large shortening, about 1000 hours; in terms of energy saving, traditional incandescent lamps due to a large amount of infrared energy loss and high temperature heating, short life, the introduction of advanced energy-saving green lights is an inevitable power-saving revolution . LED lamp is a kind of semiconductor lamp capable of converting electric energy ...
Published by FunfairledJan 11,2019
Sydney Bridge-Australia In 2013, at the pontoon head near the Luna Park in North Sydney, the Sydney Harbour Bridge with a lively Sydney West facade was a world-class feat, this iconic structure controlled interactive lighting（some of them are led lights）, debuted. The entire project cost a total of A$13.5 million (US$6.9 million). The bridge is fixed by approximately 6 million rivets with a span of 503 meters and a maximum height of 134 meters from the sea. The length of the entire Sydney Bridge bridge (including the approach bridge) is 1149 meters, 58.5 meters high from the sea surface to the bridge surface, and 134 meters from the sea surface to the top of the bridge. The 10,000-ton wheel can pass under the bridge. The bridge deck is 49 meters wide and can be used for all kinds of cars. There is a double-track railway in the middle, and the sidewalks on both sides are 3 meters wide. Under the illumination of the led lights, the bridge is more beautiful at night.
Published by FunfairledJan 09,2019
Maiden Bridge-Dubai The Maiden Bridge is an architectural marvel. The bridge connecting the Maiden Hotel and the main road has an undulating wave shape and an amazing architectural structure that attracts millions of people every year. The beautiful lighting effect makes the Maiden Bridge a magnificent landmark that can be enjoyed miles away. Philips received the task of lighting the lighting of the Maiden Bridge, which required lighting to make the bridge an architectural landmark. In order to create a new urban landmark, the project's lighting design chose a royal blue light source and was installed with a maintenance-free wall washer light so that the luminaire and the bridge's undulating structure could be seamlessly connected. The undulating royal blue light effect on both sides of the bridge is matched with the warm light source of the led flood lights on both sides of the road to form a distinct contrast between cold and warm.
Published by FunfairledJan 07,2019
Peace bridge -Canada ‘peace bridge’ was designed by Valencian Architects and Calatrava, Santiago, Spain. This is a new bridge completed in 2012 in Calgary, Canada. The bridge is made up of red and white tubular structures that connect the North Shore city across the Bow River. This project brings people through green activities such as walking and cycling. Convenience. Illuminating the pavement's pavement, serving pedestrians and cyclists, creates continuous light on opaque plastic panels. This unusual lighting approach must span lengths, so we customized 14-foot-tall fixtures. But this is more of a decorative line of led amusement light, light and bridge form a structural beam. Use linear fluorescent lamps based on their flexibility and customization. In the luminaire use program of Peace Bridge, each unit contains three 4000k linear fluorescent lamps. These fluorescent devices enhance the structurality of the bridge.
